|
|
|
|
|
|
Main Harness; Triumph TR3's Chassis' Between TS12569 & TS13045 (1051BB)
|
|
|
Main Harness for Triumph TR3's with Chassis Numbers Between TS12569 & TS13045. Contains Braided Wire with a Braided Outer Wrap. Brake Light Switch is Located on LH Side. Lockheed Brakes
|
|
|
|
|
|
|
|
|
|
Main Harness, Triumph TR3's Chassis Between TS12569 & TS13045 (1051PB)
|
|
|
Main Harness for Triumph TR3's with Chassis Numbers Between TS12569 & TS13045. Contains PVC Wire with a Braided Outer Wrap. Brake Light Switch is Located on LH Side. Lockheed Brakes
|
|
|
|
|
|
|
|
|
|
Main Harness for Triumph TR3 TS12569 -TS13045 (1031)
|
|
|
Main Harness for Triumph TR3's with Chassis Numbers Between TS12569 & TS13045.
|
|
|
|
|
|
|
|
|
|
TR2 & Early TR3 Alternator Conversion Kit (TR2E3ALT)
|
|
|
This Alternator kit comes complete with everything you will need to
convert your TR2 and Early TR3 (chassis numbers up to TS60,000) from a Generator to an Alternator. The kit
includes an new 65 Amp Alternator, and all hardware needed to replace
your old generator (bolts, washers, etc.), as well as a new alternator
belt and a very detailed set of instructions.
Kit is normally supplied set up for a Wide Belt and Pulley. If a
Narrow pulley is preferred, please advise in the "notes" section as we
are able to accommodate this set up as well. Customers would need to
supply their own belt, for the narrow pulley.
|
|
|
|
|
|
|
|
|
|
Triumph TR2 through TR3B Steering Column Harness (SC94)
|
|
|
Steering Column Harness
|
|
|
|
|
|
|
|
|
|
Battery Ground Cable (Positive Ground) (BC57)
|
|
|
Battery to (positive) Ground Cable
MG, Triumph, Austin-Healey
Fits Several Makes.
(131113)
|
|
|
|
|
|
|
|
|
|
Triumph "A Type" Gear Box Wiring Harness (863PP)
|
|
|
Overdrive Harness for Triumph A-Type Overdrives
|
|
|
|
|
|
|
|
|
|
Triumph Upper Relay Harness for "A Type" Overdrive (TR2 thru TR4A) (864)
|
|
|
Upper Relay Harness for "A Type" Over Drives. Contains PVC Wire with a PVC Tape Wrap.
|
|
|
|
|
|
|
|
|
|
Battery to Solenoid Cable (BC60)
|
|
|
Battery To Solenoid Cable
|
|
|
|
|
|
|
|
|
|
Starter to Solenoid Cable (BC59)
|
|
|
PVC wire, starter to solenoid cable. (#516064)
|
|
|
|
|
|
|
|
|
|
Engine Grounding Strap (BC65)
|
|
|
Engine Ground Strap
|
|
|
|
|
|
|
|
|
|
Front Side / Turn Signal Pigtail Kit (BW51BB)
|
|
|
Front Side Lamp and Turn Signal Pigtail Kit. Contains a LH Side Pigtail, and RH Side Pigtail. Manufactured with Braided Wire, with a Cloth Braid Wrapping. (One Kit required per car)
|
|
|
|
|
|
|
|
|
|
Headlamp Pigtail (141BB)
|
|
|
Headlamp Pigtail. Manufactured with Braided Wire, with a Braided Cloth Wrapping (2 Required per car)
|
|
|
|
|
|
|
|
|
|
Front Sidelamp / Turnsignal Pigtail Kit (BW51PB)
|
|
|
Front Sidelamp & Turnsignal Pigtail Kit. Contains PVC wire with a Braided Cloth wrap. Set of two pigtails. One Kit does one car.
|
|
|
|
|
|
|
|
|
|
Front Sidelamp / Turnsignal Pigtail Kit (BW51XB)
|
|
|
Pigtail Kit for Front Side / Turn Signal Lamps. Contains a LH Side and RH Side Pigtail. Contains a Combination of Braided and PVC Wire with a Braided Cloth Wrap
|
|
|
|
|
|
|
|
|
|
Headlamp Pigtail (141PB)
|
|
|
Headlamp Pigtail. Manufactured with PVC Wire with a braided cloth wrap. 33 Inches in Length. (2 required per car)
|
|
|
|
|
|
|
|
|
|
Front Sidelamp / Turnsignal Pigtail Kit (BW51PP)
|
|
|
Pigtail Kit for Front Side / Turn Signal Lamps. Contains a LH Side and RH Side Pigtail. Contains PVC Wire in a PVC Sleeve.
|
|
|
|
|
|
|
|
|
|
Headlamp Pigtail (Fits most cars) (141)
|
|
|
Headlamp Pigtail. Manufactured with PVC wire, with a Black PVC Sleeve. 33 Inches in length. (2 required per car)
|
|
|
|
|
|
|
|
|
|
54 -56 Triumph TR 2 - TR 3, up to TS 12,568 Low Tension Lead (509347)
|
|
|
Low Tension Lead from Coil to Distributor
|
|
|
|
